The Park 480 Brushless Outrunner motor is designed to deliver clean and quiet power for 3D park flyers weighing 20 to 30 ounces (565 to 850 grams), scale park flyers weighing 25 to 35 ounces (710 to 990 grams), or models requiring up to 250 watts of power. Its an especially good match for E-flite’s Mini Edge 3D ARF (EFL2225) and Mini Funtana 3D ARF (EFL2075), and would provide extreme power for sport park flyers such as the Mini Ultra Stick ARF (EFL2250).
Features
- Perfect match for 3D park flyers weighing 2030 oz (565850 g)
- Ideal for scale park flyers 2535 oz (710990 g)
- Ideal for models requiring up to 250 watts of power
- High-torque, direct-drive alternative to inrunner brushless motors
- Includes mount, prop adapters and mounting hardware
- External rotor design, 4mm shaft can easily be reversed for alternative motor installations
- Slotted 12-pole outrunner design
- Quiet, lightweight operation
- High-quality construction with ball bearings and hardened steel shaft
Requires
- 20A35A brushless ESC
- 2S3S Li-Po or 6- to 10-cell Ni-MH/Ni-CD
- 10x712x6 propeller
Specs
- Adjustable Timing: No
- Bushing Or Bearing: Bearing
- Connector Type: 3.5mm Bullet
- Idle Current (Io): .85A @8V
- Motor Design: Outrunner
- Motor Type: Brushless
- Outer Diameter: 1.4 in (35mm)
- Recommended Prop Range: 10×7 to 12×6
- Resistance: .08 ohms
- RPM/Volt (Kv): 910
- Shaft Diameter: 4mm (.16 in)
- Voltage: 7.2 to 12
- Wire Gauge: 16 AWG
